Microphones : Vocal / Announcer / Interview Microphones : Shure Incorporated - KSM32/CG

Embossed Single Diaphragm Microphone with 20Hz to 20kHz frequency Response, Charcoal Gray Finish

Series: Shure

Model: KSM32/CG

Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity
Embossed, high-compliance diaphragm provides extended low frequency response
Ultra-thin, gold-layered, low mass, Mylar diaphragm for excellent transient response
15dB attenuation switch for handling extremely high sound pressure levels (SPL)
Switchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Embossed single diaphragm microphone is a premium side-address cardioid condenser microphone for highly critical studio recording and live sound productions. It features an extremely flat, extended frequency response for transparent reproduction of the original sound source with multi-position low-cut filter and 15dB attenuation switches for superior handling of high sound pressure levels.

Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity
Embossed, high-compliance diaphragm provides extended low frequency response
Ultra-thin, gold-layered, low mass, Mylar diaphragm for excellent transient response
15dB attenuation switch for handling extremely high sound pressure levels (SPL)
Switchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect
Integrated three-stage pop protection grille reduces pop and other breath noise
Internal shock mount reduces transmission of handling noise

Polar/Pickup Pattern - Cardiod
Microphone Type - Condenser
Microphone Connectivity - Wired
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Dynamic Range: 126 dB
Maximum SPL (Sound Pressure Level): 139 dB
Signal to Noise Ratio: 81 dB
Wireless: No
Height: 7.37 in
Product Weight: 1.08 lbs
Noise: 13 dBA
Regulatory Compliance: CE
Color: Charcoal gray
DC Voltage: 48 Volts
Phantom Power: 48 ±4 VDC (positive pins 2 and 3)
Current Drain: 4.65 mA (typical at 48Vdc)
Common Mode Rejection: >50 dB (20Hz to 20kHz)
Maximum Body Diameter: 2.2 in (55.9mm)
Output Clipping Level: 9 dBV (2500 ohms load)
Total Harmonic Distortion: <0.08 % (2500 ohms load)
Impedance: 150 ohm
Sensitivity: -36 dBV

A300PC - Polishing Cloth for KSM Microphones

A32VB - Velveteen Pouch for KSM32 Microphone

A32WS - Foam Windscreen for SM27, KSM32, KSM27 and KSM44

A32ZB - Zippered Microphone Carrying Bag for KSM32 or KSM44 Microphones

KSM137/SL - End Address Cardioid Condenser Instrument Microphone, Champagne Finish

KSM141/SL - Dual Polar Pattern Condenser Instrument Microphone, Champagne Finish

KSM32/SL - Embossed Single Diaphragm Microphone with 20Hz to 20kHz frequency Response, Champagne Finish

RK372 - Grille for KSM32/CG Microphone

RK373 - Elastic Bands for KSM32 Shock Mount

RK374 - Replacement Cartridge for KSM32 Microphones

RK375 - Switch/FET PCB for KSM32 Microphone

Condenser Microphone 646 kb - Data Sheet

Project List

Products

Embossed Single Diaphragm Microphone with 20Hz to 20kHz frequency Response, Charcoal Gray Finish

Series: Shure

Model: KSM32/CG

Suggested Products